If your garage door is not working properly, you should consider getting a new cable and reattaching the old one. If you can’t do this, however, there are some signs you need to call a garage door technician. These signs may indicate that your cable is nearing its end and requires replacement. These signs may also be accompanied by other issues, such as loose cables. Read on for a few tips to help you do it yourself.
Repairing garage door cables
If your garage door stops functioning properly, you’ll want to consider replacing the cable. Cables that have frayed wires, oxidation, or rusting are common problems. Ultimately, you’ll want to replace the entire cable to protect your garage door from a spring failure. However, this process can be overwhelming. Customer support can guide you through the process. Here are some tips for repairing garage door cables.
If you hear a grinding or squeaking noise when the door raises or lowers, the cable might be to blame. If the cables are twisted or not attached properly, it’s likely that your bearings are faulty. The same is true if the cable starts to show signs of excessive wear. It may even emit a smell. Fortunately, most garage doors have instructions for replacing the cables themselves.
Getting a new cable
If you are experiencing problems with your garage door, it might be time to get a new cable. If you are replacing the cable, here are some tips to get started. First, you will need to know how to install a new one. Before beginning the repair, you will need to get the correct tools. To begin, you will need a step ladder. To prevent the door from closing unexpectedly, you can also use C-clamps or locking pliers to secure it. To get started, you will want to locate the broken side of your door. You will most likely find the cable in the winding drum, which is located on the rear of your door.
A broken cable will likely fail again soon, so it is best to replace all cables at once. If you only replace one cable, you’ll end up with several cables with different ages. This will ensure that all cables are the same age, which will eliminate any surprises in the near future. Once you have a replacement kit, you will be able to easily replace one cable at a time, or even several.
Reattaching the old cable to the drum
Reattaching the old garage door cable to its drum is relatively simple, but it may not be as easy as you think. First, you need to remove the old cable. Remove the pin on the bottom of the door and the cable from the drum. You can use a vise-grip clamp to hold the shaft while you loosen the cable. Next, you need to loop the new cable around the drum peg and reattach it to the drum.
To do this, you will first need a step ladder and C-clamps to prevent the door from closing unexpectedly. Once you have access to the drum, begin by locating the broken cable. It is likely to be located in the notch or winding drum of the door. You can then turn the set screw counterclockwise until the cable is secured. If you haven’t done this before, you may want to consult a professional.
Signs that you need a garage door technician
Even if you’ve never had any formal training in garage door repair, you’ll be surprised to discover just how frequently your garage door might need repair. While most homeowners eventually come to realize they need professional help when they first notice their garage doors exhibiting these signs, others are unsure of what to look for, making them an ideal candidate for emergency repairs. Here are a few of the most common warning signs you should look for.
A noisy garage door is a common sign that you need to call a technician. It could be the result of a broken spring, or it could be a problem with the tracks and panels. A loud grating or popping noise is another sign. You may need to align the springs or repair a broken spring if the noise persists. Either way, if you notice a noise, stop the door and call a garage door technician right away.